phone0407 164 909

Solar-Grid Installation & Design Course

Solar-Grid Installation & Design Course (UEERE0054, UEERE0061, UEERE0080, UEERE0081)

This course fulfils the qualification requirement for Queensland Electricians to gain their Grid-Connect Install and Design PV System Accreditation from the Clean Energy Council (CEC).

The CEC is the peak body representing Australia’s clean energy sector. Once accredited, Electricians are eligible for government rebates such as Small-scale Technology Certificates and feed-in tariffs. This solar course is delivered in Queensland for licenced electricians (or those holding the pre-requisite units) and covers nationally recognised units of competency UEERE0054, UEERE0061, UEERE0080 & UEERE0081.

COURSE DURATION: 5 days

COURSE FEE: $2,400

CSQ SUBSIDISED COURSE FEE: $1,312*

*Available for most Queensland Electricians.  Contact our office on 0407 164 909 for further information or to check your eligibility complete the CSQ funding application below.

If you wish to apply for CSQ funding for this course please complete both an enrolment form and the CSQ funding application.  Do not worry if you are unable to upload all your evidence documents to the CSQ funding application as we will be in contact if any information is missing from your application or enrolment form.


Upcoming Courses

If you are interested in finding more Solar Courses For Electricians in Qld, Electro Training has a course for you to enrol in. Get in touch with our institute and kick start your career!

Course Calendar

Learn More About the Solar Installation & Design Course

What are the units covered in this course?

This course covers the following nationally recognised units of competency: 

  • UEERE0054 - Conduct site survey for grid-connected photovoltaic and battery storage systems
  • UEERE0061 - Design grid-connected photovoltaic power supply systems 
  • UEERE0080 - Install photovoltaic power conversion equipment to grid
  • UEERE0081 - Install photovoltaic systems to power conversion equipment

These units of competency fulfill the qualification requirement for Electricians to gain their Grid-Connect Install and Design PV System Accreditation from the Clean Energy Council (CEC).

Who is eligible for this course?

Those who are eligible for this course are required to be:

  • Electricians who hold a current Queensland Electrical Work Licence (or equivalent) and wish to gain knowledge and/or CEC Accreditation
  • Electrical Apprentices who have completed the following pre-requisites units:
    UEEEL0012 Install low voltage wiring, appliances, switchgear and associated accessories
    UEEEL0039 Design, install and verify compliance and functionality of general electrical installations
  • Trade Assistants who wish to gain further knowledge of solar PV installation and design. A Certificate of Attendance will be issued upon completion.

What are the course outcomes?

There are two types of Grid Connect Accreditation you can achieve upon completion of solar  courses for Electricians, including: 

Install Accreditation: Required to install Grid Connected Solar Systems in Australia (UEERE0080 & UEERE0081)

Design Accreditation: Required to design Grid Connected Solar Systems in Australia (UEERE0054 & UEERE0061) 

If you’re only interested in becoming qualified to install Grid Connected Solar Systems, then all you need to complete is the Install pathway. However, it’s important to note that as an accredited installer you will have to work in conjunction with an accredited designer for all Solar jobs. If you want to be able to undertake the entire project, you need to be trained and accredited within the Design and Install pathway. When considering solar courses for Electricians in Queensland, most choose the full accreditation option as it not only gives them greater flexibility and more opportunities, but a greater understanding of the installation job.

Upon completion of this course, you will be able apply for accreditation with the Clean Energy Council (CEC). Once accredited, Electricians are eligible for government rebates such as Small-scale Technology Certificates and feed-in tariffs. 

How long is this course?

The install and design course is delivered over a five-day face-to-face workshop. We show you the real work applications of installation, from tin feet and tile feet to hanger bolts and tilt frames, tripods and ground mounts to understanding how to size an isolator, fit off a multi-hole glands and test, verify and commission the whole system.

Our trainer is an Electrical Contractor who works in the solar industry. Working through simulated work situations he will be on hand to offer support and guidance.

Am I eligible for CSQ funding?

Most Queensland Electricians are eligible for CSQ funding.  To check your eligibility complete the CSQ funding application or call our team today on 0407 164 909.