phone0417 077 276

Certificate II In Split Air Conditioning & Heat Pump Systems

Certificate II In Split Air Conditioning & Heat Pump Systems (UEE20111)


Thank You

your details have been sent

Certificate II In Split Air Conditioning & Heat Pump Systems - Enrolment Form

First Names

Surname

Mobile Phone

Email

Date of Birth (DD/MM/YYYY)

Sex

Male
Female

Personal Details

If you have completed a course with us in the past and your details have remained the same you may skip this section.

Trade Licence #

Trade

State Issued

Address

Postal Address

Home Phone

Fax


Company Details

If you have completed a course with us in the past and your details have remained the same you may skip this section.

Company Name

Company Contact

Address

Postal Address

Phone

Fax

Email


Course Details

Course Name

Area

Course Date

Please select where the invoice/receipt should be sent

Company Address
Student Address

Please select where the qualification should be sent

Company Address
Student Address

If you were referred to us by a previous student of ours, please name here:

Students Name


USI - Unique Student Identifier

The Unique Student Identifier (USI) is a new Australia-wide student number which will introduce the capacity for students to track their training records across all Australian states and territories.

If known please state your Unique Student Identifier (USI). Your USI is 10 characters long and is a combination of numbers and letters:

USI - Unique Student Identifier

If you do not know your Unique Student Identifier (USI), please complete the fields below and our staff will check to see if you have a USI. If you do not have a USI our staff will create one for you.

Town/City of Birth

Drivers licence details (If you do not hold a current drivers licence please contact our office (07 4724 4543) for an alternative document for proof of your identity:

Drivers Licence Number

State Issued

Expiry Date

As part of our data collection requirements we ask that you please answer the following questions, should you have any concerns please contact our office (07 4724 4543).

1. In which country were you born?

Australia
Other

If Other please specify

2. Do you speak a language other than English at home?

No, English Only - Go to Question 4
Yes

If Yes please specify

3. How well do you speak English?

Very Well
Well
Not Well
Not at all

4. Are you Aboriginal or Torres Strait Islander origin?

No
Yes, Aboriginal
Yes, Torres Strait Islander
Yes, Both

5. Do you consider yourself to have a disability, impairment or long-term condition?

Yes
No - Go to Question 7

6. If YES, then please indicate the areas of disability, impairment or long-term condition:

Hearing/Deaf
Physical
Intellectual
Learning
Mental Illness
Acquired Brain Impairment
Vision
Medical Condition
Other

7. What is your highest COMPLETED school level?

Year 12 or equivalent
Year 11 or equivalent
Year 10 or equivalent
Year 9 or equivalent
Year 8 or equivalent
Never attended school – Go to question 9

8. In which YEAR did you complete that school level?

9. Are you still attending secondary school?

Yes
No

10. Have you SUCCESSFULLY completed any of the following qualifications in Question 11?

Yes
No

11. If YES, then select ANY applicable boxes.

Bachelor Degree or Higher Degree
Advance Diploma or Associate Degree
Diploma or Associate Diploma
Certificate IV (or Advanced Certificate/Technician)
Certificate III (or Trade Certificate)
Certificate II
Certificate I
Certificates other than the above

12. Of the following categories, which BEST describes your current employment status?

Full-time employee
Part-time employee
Self employed – not employing others
Employer
Employed – unpaid worker in a family business
Unemployed – seeking full-time work
Unemployed – seeking part-time work
Not employed – not seeking employment

13. Of the following categories, which BEST describes your main reason for undertaking this course/traineeship/apprenticeship?

To get a job
To develop my existing business
To start my own business
To try for a different career
To get a better job or promotion
It was a requirement of my job
I wanted extra skills for my job
To get into another course of study
For personal interest or self-development
Other reasons

UEE20111 Certificate II in Air Conditioning Split Systems

RPL process, classroom and practical delivery.


Payment Details

Total Fee: $1,650.00

Note: The supply of an Education Course is a GST-free supply and therefore the course fee does not include GST

I wish to pay by:

Cheque
Company Order Number
Direct Deposit
Credit Card

Please note: Full payment is required one week prior to commencement of this course.


Pre requisites of course

To be eligible for this course, students must be a trade qualified Electrician

  • Students must hold a Trainee "classroom only" License from the Australian Refrigeration Council prior to course commencement. The Trainee License allows the student to handle refrigerant gas during the course. Once we receive your enrolment form we will reply with information on how to apply for the Trainee License. Please contact our office if further information is required prior to enrolling.

Course details

  • A basic level of Literacy and Numeracy knowledge must be held by the student.
  • Course starts at 8.00am and finish at 4.00pm daily.
  • Registration is from 7.45am on the day.
  • The course fees are per delegate and include workbook and handouts.
  • You will need note paper, pen and a calculator.
  • All equipment is supplied. If you have the following tools, bring: Pliers, screwdriver, mapgas, gauges, flaring tools, tubecutter, vac pump and reclaim unit. (So the course facilitator can instruct and test you on your own equipment)
  • Venue to be advised
  • Abusive or offensive behavior is not tolerated by the course facilitators and you may be asked to leave the course facilities without refund of the course fee upon breach of any of our policies. Please see our policies and procedures (published on our website or you may request a copy from our office) for further information.

Recognised Prior Learning (RPL) process: The RPL process is a pre-requisite of the course. Information required will be explained at initial contact.

Late Arrivals: The course commences at 8am, any students arriving later than 30 minutes after course commencement will not be able to attend the course and will not be eligible for a refund of the course fee.

Student Cancellation: A fee of 20% of total course will apply for written cancellations received seven-fourteen days prior to commencement of the course. Cancellations received less than seven days prior to the course are not refundable however substitutes on same dates are welcome.

Institute Cancellation: The Electro-Training Institute guarantees that the training and assessment will be completed by a qualified person on the date specified on the student’s confirmation. Should the Electro-Training Institute not provide the training and assessment on the specified date a full refund will be given to the student within two working days of their bank details being received in writing by the Electro-Training Institute office.

Confirmation: Full confirmation details and course instructions will be sent to you upon receipt of booking.

Certificates/Statements of Attainment and Academic Records of Achievement: Upon successful completion, of the course, Electro-Training Institute will provide a qualification in the form of a Certificate/Statement of Attainment as well as an Academic Record of Achievement. This qualification will be mailed out to the indicated address on the students enrolment form. It is the responsibility of the student to provide Electro-Training Institute with the correct mailing address. A fee of $35.00 will apply for any re-prints of the Certificate/Statement of Attainment and Academic Record of Achievement.

Student deemed Unsuccessful/Not Yet Competent: If a student fails to complete an assessment or is unsuccessful in completing an assessment task/exam they are deemed as ‘Not Yet Competent’ by the assessor and the assessor will nominate a time for re-assessment within class time. This second assessment will be free of charge. If the student remains ‘Not Yet Competent’ after the second assessment, he or she will be notified that this result is final and he or she will be unable to successfully complete the unit of competency in which they are enrolled. Any further assessment will be fee for service and the student will need to have a meeting with the Institute Director to create an individual learning plan before their re-enrolment in the course is confirmed.

Please note: Venues to be confirmed upon registration. Instructors may change without notice. Electro-training institute has no affiliation with suppliers or manufacturers and therefore presents a completely unbiased factual view of the industry.

Professional development: This course is designed to meet your Qualification requirements of the Australian Refrigeration Council to apply for a RSS03 Restricted Gas Handling Licence. A document recording your attendance and results will be awarded at the end of the course.

Access of records and progress: If at any time you wish to have access to your records or you have any questions regarding your participation or progress please contact our office.

Complaints and Appeals: We welcome any feedback about the course delivery and/or content, if you have any complaints or you wish to appeal any decision made regarding your participation please view our complaints and appeals procedure on our website or contact our office for a hard copy.

Privacy Notice: Under the Data Provision Requirements 2012, Electro-Training Institute is required to collect personal information about you and to disclose that personal information to the National Centre for Vocational Education Research Ltd (NCVER).

Your personal information (including the personal information contained on this enrolment form and your training activity data) may be used or disclosed by Electro-Training Institute for statistical, regulatory and research purposes. Electro-Training Institute may disclose your personal information for these purposes to third parties, including:

  • School – if you are a secondary student undertaking VET, including a school-based apprenticeship or traineeship;
  • Employer – if you are enrolled in training paid by your employer;
  • Commonwealth and State or Territory government departments and authorised agencies;
  • NCVER;
  • Organisations conducting student surveys; and
  • Researchers.

Personal information disclosed to NCVER may be used or disclosed for the following purposes:

  • Issuing a VET Statement of Attainment or VET Qualification, and populating Authenticated VET Transcripts;
  • facilitating statistics and research relating to education, including surveys;
  • understanding how the VET market operates, for policy, workforce planning and consumer information; and
  • administering VET, including program administration, regulation, monitoring and evaluation.

You may receive an NCVER student survey which may be administered by an NCVER employee, agent or third party contractor. You may opt out of the survey at the time of being contacted.

NCVER will collect, hold, use and disclose your personal information in accordance with the Privacy Act 1988 (Cth), the VET Data Policy and all NCVER policies and protocols (including those published on NCVER’s website at www.ncver.edu.au).

Student Declaration and Consent

I declare that the information I have provided to the best of my knowledge is true and correct.
I consent to the collection, use and disclosure of my personal information in accordance with the Privacy Notice above.